|
[Sponsors] |
Modeling Flow Boiling in Evaporator Channels with COMSOL Multiphysics |
![]() |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
![]() |
![]() |
#1 |
New Member
Join Date: Mar 2025
Posts: 1
Rep Power: 0 ![]() |
Hello everyone,
I’m working on a numerical model of flow boiling in evaporator channels using COMSOL. My goal is to capture the formation and growth of vapor phase due to channel heating, observe the resulting increase in vapor quality, and account for the transition between different flow regimes. Does anyone have experience or guidance on how best to implement a two-phase boiling model in COMSOL? Thank you so much! |
|
![]() |
![]() |
![]() |
Tags |
evaporator, flow boiling, fluid flow, heat transfer, two phase flow |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Questions about FLOW 3D modeling capabilities | Dr Youssef Hafez | FLOW-3D | 0 | January 7, 2023 11:37 |
Is recirculating flow is free vortex or forced vortex? | FluidKo | Main CFD Forum | 11 | July 21, 2022 06:21 |
unable to run dynamic mesh(6dof) and wave UDF | shedo | Fluent UDF and Scheme Programming | 0 | July 1, 2022 17:22 |
Issues on the simulation of high-speed compressible flow within turbomachinery | dowlee | OpenFOAM Running, Solving & CFD | 11 | August 6, 2021 06:40 |
Hydrostatic pressure in 2-phase flow modeling (CFX4.2) | HB &DS | CFX | 0 | January 9, 2000 13:19 |