A question about submitInOrder.bat

whysoserious · January 10, 2017, 03:36

I use converge to run my case. Due to increasing sever utility efficiency, I want to submit several cases in one shot, and let them treated one by one. But, are there anything wrong with my submitInOrder.bat file? why only the case1 has output files when I run it.
Thank you!

jlemoine · January 11, 2017, 12:25

Jietuo,

This is not coming from CONVERGE but your bat file. I am not too familiar with the bat file but it seems from your description the problem is coming from changing your directory once the ./cvgRun.bat is called. As a test have your tried cd .. instead of cd %parentDir%?

January 11, 2017, 12:25		#2
jlemoine Member Jerome Le Moine Join Date: Jan 2016 Location: Convergent Science, Madison WI Posts: 50 Rep Power: 11	Jietuo, This is not coming from CONVERGE but your bat file. I am not too familiar with the bat file but it seems from your description the problem is coming from changing your directory once the ./cvgRun.bat is called. As a test have your tried cd .. instead of cd %parentDir%? __________________ Jerome Le Moine Support/Application Engineer CONVERGECFD

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Question about symmetry in Autodesk Cfd 2016	ecto	Autodesk Simulation CFD	0	October 20, 2015 05:16
small question about the functionalities of topological changes in OpenFoam	ngj	OpenFOAM Running, Solving & CFD	2	February 28, 2013 11:02
Question Re Engineering Data Source	imnull	ANSYS	0	March 5, 2012 14:51
internal field question - PitzDaily Case	atareen64	OpenFOAM Running, Solving & CFD	2	January 26, 2011 16:26
Poisson Solver question	Suresh	Main CFD Forum	3	August 12, 2005 05:37