CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > CONVERGE

Fixed embedding for the spray

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   November 10, 2017, 16:40
Default Fixed embedding for the spray
Senior Member
amin u3fi
Join Date: Feb 2013
Posts: 134
Rep Power: 7
amin_u50 is on a distinguished road

I was wondering how deep should be the fixed embedding length? In the example file, it is 0.01 m. However, in my case, the spray penetration is around 0.05 m.
amin_u50 is offline   Reply With Quote

Old   November 13, 2017, 18:50
tmburton's Avatar
Tristan Burton
Join Date: Sep 2017
Posts: 79
Rep Power: 3
tmburton is on a distinguished road

We normally embed a short distance (0.01 m) and turn on velocity AMR at the same level as the injector embedding. However, if the parcels get into the coarser mesh before the velocity AMR kicks in (it's lagging a time step or two behind), then we increase the embed length.

Best regards,

Tristan Burton
Senior Principal Engineer
tmburton is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
fixed bed reactor Many Fluent Multiphase 2 February 12, 2018 21:30
Spray fixed embedding start and end time amin_u50 CONVERGE 2 November 1, 2017 09:00
Can anyone suggest a good tutorial of Spray Combustion in Ansys FORTÉ? shubhra ANSYS 2 October 5, 2017 06:06
Fixed CL mode in SU2 V4.2 ygd SU2 0 November 15, 2016 09:59
spray injection mmacrb FLUENT 0 January 10, 2007 04:57

All times are GMT -4. The time now is 02:49.