CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > CONVERGE

Warning simulation

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old   November 24, 2017, 05:59
Default Warning simulation
  #1
Member
 
gasem
Join Date: Jul 2017
Posts: 45
Rep Power: 2
jiliyur is on a distinguished road
Hi everyone i simulate a section of engine and when do it i meet this warning
warning:the total mass of removed parcels is 2.5200e-11 how can i solve it?
jiliyur is offline   Reply With Quote

Old   November 24, 2017, 07:14
Default
  #2
Senior Member
 
Tobias
Join Date: May 2016
Location: Germany
Posts: 155
Rep Power: 3
MFGT is on a distinguished road
2.5200e-11 is such a small mass, that probably 1 parcel got removed by whatever reasons.

If you inject 10mg of fuel, this one parcel would be 0.000252%.
The effect on the overall simualtion result should be neglectable.
MFGT is offline   Reply With Quote

Old   November 24, 2017, 07:36
Default
  #3
Member
 
gasem
Join Date: Jul 2017
Posts: 45
Rep Power: 2
jiliyur is on a distinguished road
Hi do you mean that i inject mor fuel for resolve this warning
But i can inject because i simulat from expermental data
jiliyur is offline   Reply With Quote

Old   November 24, 2017, 09:50
Default
  #4
Senior Member
 
Tobias
Join Date: May 2016
Location: Germany
Posts: 155
Rep Power: 3
MFGT is on a distinguished road
I am just saying that this is a very small quantity of fuel mass that gets lost.
I dont know how to resolve this warning. Hoewever, i think it can be ignorred if you are not having excessive droplet loss.
MFGT is offline   Reply With Quote

Old   November 24, 2017, 10:09
Default
  #5
Member
 
gasem
Join Date: Jul 2017
Posts: 45
Rep Power: 2
jiliyur is on a distinguished road
Ok thanks for your replying
jiliyur is offline   Reply With Quote

Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
using METIS functions in fortran dokeun Main CFD Forum 7 January 29, 2013 05:06
discretizer - gmshToFoam Andyjoe Open Source Meshers: Gmsh, Netgen, CGNS, ... 13 March 14, 2012 05:35
mesh airfoil NACA0012 anand_30 OpenFOAM Meshing & Mesh Conversion 12 December 12, 2011 05:16
channelFoam for a 3D pipe AlmostSurelyRob OpenFOAM 3 June 24, 2011 13:06
Cells with t below lower limit Purushothama Siemens 2 May 31, 2010 21:58


All times are GMT -4. The time now is 22:39.