CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CONVERGE (https://www.cfd-online.com/Forums/converge/)
-   -   Parcel lost or duplicated (https://www.cfd-online.com/Forums/converge/199723-parcel-lost-duplicated.html)

Nitisha March 13, 2018 13:08
Parcel lost or duplicated
 
Hello,
I am trying to run a IC Engine simulation using RANS. I have 6 nozzles with each nozzle having 50000 parcels. During the mid of simulation, at around 570 CAD after the injection is over, I get the following error;

1807 ERROR: Error while book-keeping parcels, likely caused by parcel being lost or duplicated. Total no of parcels (141035) does not match the number of parcels stored in parcel lists (141033).

ywang89 April 18, 2018 11:43
Quote:
Originally Posted by Nitisha (Post 685056)
Hello,
I am trying to run a IC Engine simulation using RANS. I have 6 nozzles with each nozzle having 50000 parcels. During the mid of simulation, at around 570 CAD after the injection is over, I get the following error;

1807 ERROR: Error while book-keeping parcels, likely caused by parcel being lost or duplicated. Total no of parcels (141035) does not match the number of parcels stored in parcel lists (141033).
This usually happens when there is the alignment issue with the liner or valves. Please double check with your geometry to make sure no parcels will be removed during simulation.


All times are GMT -4. The time now is 02:39.