Average velocity BC
Hello all,
I'm using an average velocity value as intake and, as stated on Converge's manual, it is substituted by a fully developed profile. I'm wondering: does Converge use a turbulent or a laminar profile? I'm getting maximum velocities near to 24 m/s when using a average velocity of 10 m/s, that is, near 2 times the average velocity. This is a value more related to a laminar flow (and my flow is turbulent). Thank you, Filipi |
Hello Filipi, thank you for asking about this. This boundary condition uses information from the flow field and does not prescribe a predefined velocity profile. That being said, it can be associated with either laminar or turbulent profile, depending on the problem.
Quote:
|
All times are GMT -4. The time now is 17:05. |