CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > CONVERGE

Ecfm+sage

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   June 5, 2021, 04:02
Default Ecfm+sage
  #1
Member
 
Yaopeng Li
Join Date: Dec 2017
Location: Lund, Sweden
Posts: 42
Rep Power: 5
Eleven Leo is on a distinguished road
Hi,

I am using Converge 3.0, and I recently want to use ECFM with SAGE. Based on the ECFM with ISSIM model, I added SAGE calculation. According to the warning, in the "Species-->Gas" part,I added "UF_CH3OH" and deleted "O2", "N2", "CO2", "H2O", "H", "H2", "O", "N", "OH", and "CO".
But an error occured, it showed "EXIT STATUS: -1 (ffffffff)".
I don't know the reason, can anyone help me?
Thank you very much for your kind help.

Best regards
Yaopeng
Eleven Leo is offline   Reply With Quote

Old   June 9, 2021, 17:53
Default
  #2
New Member
 
Join Date: Jun 2020
Posts: 16
Rep Power: 3
Pedram Tazraei is on a distinguished road
Quote:
Originally Posted by Eleven Leo View Post
Hi,

I am using Converge 3.0, and I recently want to use ECFM with SAGE. Based on the ECFM with ISSIM model, I added SAGE calculation. According to the warning, in the "Species-->Gas" part,I added "UF_CH3OH" and deleted "O2", "N2", "CO2", "H2O", "H", "H2", "O", "N", "OH", and "CO".
But an error occured, it showed "EXIT STATUS: -1 (ffffffff)".
I don't know the reason, can anyone help me?
Thank you very much for your kind help.

Best regards
Yaopeng
As an example case, you can refer to Internal_Combustion_Engines/Gasoline_spark_ignition_GDI/Tumble_GDI_ECFM_SAGE_transient_RANS/surface_CR_10_IV_02mm_EV_04mm.cvg


Under species/Gas, you can add the unburnt species.
__________________
Pedram Tazraei, Ph.D.
Senior Research Engineer
Convergent Science, Inc.
Madison, WI, USA
www.convergecfd.com
Pedram Tazraei is offline   Reply With Quote

Old   June 13, 2021, 21:16
Default
  #3
Member
 
Yaopeng Li
Join Date: Dec 2017
Location: Lund, Sweden
Posts: 42
Rep Power: 5
Eleven Leo is on a distinguished road
Hi Pedram Tazraei,

In my example case folder, either I found Tumble_GDI_ECFM_transient_RANS or Tumble_GDI_SAGE_transient_RANS, I didn't find the case combining both SAGE and ECFM. Could you send the example case or the download link to me, my email is liyaopeng.dlut@gmail.com. Thank you very much for you help.

Quote:
Originally Posted by Pedram Tazraei View Post
As an example case, you can refer to Internal_Combustion_Engines/Gasoline_spark_ignition_GDI/Tumble_GDI_ECFM_SAGE_transient_RANS/surface_CR_10_IV_02mm_EV_04mm.cvg


Under species/Gas, you can add the unburnt species.
Eleven Leo is offline   Reply With Quote

Old   June 15, 2021, 15:00
Default
  #4
New Member
 
Join Date: Jun 2020
Posts: 16
Rep Power: 3
Pedram Tazraei is on a distinguished road
Quote:
Originally Posted by Eleven Leo View Post
Hi Pedram Tazraei,

In my example case folder, either I found Tumble_GDI_ECFM_transient_RANS or Tumble_GDI_SAGE_transient_RANS, I didn't find the case combining both SAGE and ECFM. Could you send the example case or the download link to me, my email is liyaopeng.dlut@gmail.com. Thank you very much for you help.
What version are you using?
__________________
Pedram Tazraei, Ph.D.
Senior Research Engineer
Convergent Science, Inc.
Madison, WI, USA
www.convergecfd.com
Pedram Tazraei is offline   Reply With Quote

Old   June 15, 2021, 20:01
Default
  #5
Member
 
Yaopeng Li
Join Date: Dec 2017
Location: Lund, Sweden
Posts: 42
Rep Power: 5
Eleven Leo is on a distinguished road
My version is Converge 3.0. Thank you.

Quote:
Originally Posted by Pedram Tazraei View Post
What version are you using?
Eleven Leo is offline   Reply With Quote

Old   June 28, 2021, 10:09
Default
  #6
New Member
 
Join Date: Jun 2020
Posts: 16
Rep Power: 3
Pedram Tazraei is on a distinguished road
Please contact the support team at support@convergecfd.com to talk about the example resources available in the studio.
__________________
Pedram Tazraei, Ph.D.
Senior Research Engineer
Convergent Science, Inc.
Madison, WI, USA
www.convergecfd.com
Pedram Tazraei is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Detonation, Unburnt Abs.Temperature and difference between BVM and ECFM model Viento CFX 3 December 14, 2018 17:49
ECFM flamespeed flame-wall correction simone.altobelli CONVERGE 2 November 15, 2017 05:02
How to detect knock by using SAGE combustion model ankitraut27 CONVERGE 1 November 8, 2017 11:14
Multizone Settings in SAGE MFGT CONVERGE 6 February 11, 2017 05:38
Combustion simulation and SAGE settings Owain_Parry CONVERGE 6 January 21, 2017 09:56


All times are GMT -4. The time now is 15:56.