[farnaz.rezaei]

Hi

when I want to run in converge v3 there is some error than I cant fixed it
I need help

Error is:
= BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES

= RANK 2 PID 7608 RUNNING AT DESKTOP-TATL411H

= EXIT STATUS: -1073741515 (c00001135)

[jetcheve]

Originally Posted by farnaz.rezaei

Hi

when I want to run in converge v3 there is some error than I cant fixed it
I need help

Error is:
= BAD TERMINATION OF ONE OF YOUR APPLICATION PROCESSES

= RANK 2 PID 7608 RUNNING AT DESKTOP-TATL411H

= EXIT STATUS: -1073741515 (c00001135)

Hi, Farnaz!

Unfortunately this error message by itself is impossible to troubleshoot with additional information Could you provide more information? What version are you using? What are you trying to do? When does this error occur? Is there more information that is given such as a warning or a more detailed error message?

Thanks!

- John

[farnaz.rezaei]

Hi

I use version 3.0.17
when I want run converge this massage appear in run page and then stop running and write finished.
I am running one-cycle, four stroke of a motored DI engine and fuel is diesel2.
my case setup has no error and validate all.
as the ‘‘baseline simulations,” the flow field solution was implemented using the Re-Normalization Group (RNG) Reynolds Averaged Navier–Stokes (RANS) k–e turbulence model. The primary and secondary breakup of the injected fuel were modeled using the Kelvin–Helmholtz and Rayleigh–Taylor (KH–RT) models.

[jetcheve]

Originally Posted by farnaz.rezaei

Hi

I use version 3.0.17
when I want run converge this massage appear in run page and then stop running and write finished.
I am running one-cycle, four stroke of a motored DI engine and fuel is diesel2.
my case setup has no error and validate all.
as the ‘‘baseline simulations,” the flow field solution was implemented using the Re-Normalization Group (RNG) Reynolds Averaged Navier–Stokes (RANS) k–e turbulence model. The primary and secondary breakup of the injected fuel were modeled using the Kelvin–Helmholtz and Rayleigh–Taylor (KH–RT) models.

Farnaz -

First, I would try updating your solver to the latest version in case this is a known issue that we have fixed already.

Next, if you could tell me if there are any errors or warnings and when the crash occurs that would be helpful. Unfortunately the error message you've provided doesn't tell us much without more context.

- John