 |
 |
 |
|
|
|
[Sponsors] | ||||
Simulation of a Wind Turbine Using an Actuator Line Model |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
April 15, 2022, 12:17
|
Simulation of a Wind Turbine Using an Actuator Line Model
|
#1 |
|
New Member
Shelbi Stowers
Join Date: Nov 2021
Posts: 8
Rep Power: 5  |
This video, courtesy of the Wind Section of the REASE group at the University of Florence, shows a simulation of a DTU 10 MW reference wind turbine. The wind turbine was simulated using an actuator line model (ALM). ALMs replace the rotor blade with 1D lines that impose body forces corresponding to blade loading on the flow field.
https://youtu.be/MMbMkUiGpF8
__________________
__________________ Shelbi Stowers Video Editor, Marketing Convergent Science |
|
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CFD analysis on wind turbine rotor | Ken (Wind Turbine CFD Super Rookie) | Main CFD Forum | 45 | February 9, 2016 14:07 |
| Waterwheel shaped turbine inside a pipe simulation problem | mshahed91 | CFX | 3 | January 10, 2015 11:19 |
| Torque of wind turbine simulation | caohan | FLUENT | 8 | August 11, 2014 23:01 |
| FSI - Wind Turbine | AUN | CFX | 13 | August 29, 2012 16:44 |
| Wind turbine simulation | Saturn | FLUENT | 1 | June 16, 2006 02:12 |
Linear Mode
