CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   CONVERGE (https://www.cfd-online.com/Forums/converge/)
-   -   Converge - Therm.dat issue (https://www.cfd-online.com/Forums/converge/242607-converge-therm-dat-issue.html)

Mahdi.Seddiq April 30, 2022 11:39

Converge - Therm.dat issue
 
2 Attachment(s)
Hello,




I am working on ammonia combustion process in a heavy-duty diesel engine but when I use therm.dat and mech.dat files of diesel-ammonia, converge cfd will say:


Therm.dat temperature range line incorrect. String = "end"


Thanks for help or further information.

psrikanth May 19, 2022 17:03

Hi,

Is the error showing up during the input processing phase? It might be some formatting issue with therm.dat or could be something case specific. You could try opening up the case in Studio and exporting the input files again to see if the problem is with the formatting.

Mahdi.Seddiq May 23, 2022 03:58

Quote:

Originally Posted by psrikanth (Post 828323)
Hi,

Is the error showing up during the input processing phase? It might be some formatting issue with therm.dat or could be something case specific. You could try opening up the case in Studio and exporting the input files again to see if the problem is with the formatting.


Thank you for taking time.



The error is shown right after the import

psrikanth May 23, 2022 17:59

Hi,

It could possibly be an issue which is case specific, as I have not been able to reproduce the issue on my end. Please feel free to get in touch with the Support team at support@convergecfd.com (or your existing support contact) with your case setup and someone can look into this. Please use your official email for all correspondence with Convergent Science.

Praveen


All times are GMT -4. The time now is 02:45.