Converge - Therm.dat issue

Mahdi.Seddiq · April 30, 2022, 11:39

Hello,

I am working on ammonia combustion process in a heavy-duty diesel engine but when I use therm.dat and mech.dat files of diesel-ammonia, converge cfd will say:

Therm.dat temperature range line incorrect. String = "end"

Thanks for help or further information.

psrikanth · May 19, 2022, 17:03

Hi,

Is the error showing up during the input processing phase? It might be some formatting issue with therm.dat or could be something case specific. You could try opening up the case in Studio and exporting the input files again to see if the problem is with the formatting.

Mahdi.Seddiq · May 23, 2022, 03:58

Quote:

Originally Posted by psrikanth

Hi,

Is the error showing up during the input processing phase? It might be some formatting issue with therm.dat or could be something case specific. You could try opening up the case in Studio and exporting the input files again to see if the problem is with the formatting.

Thank you for taking time.

The error is shown right after the import

psrikanth · May 23, 2022, 17:59

Hi,

It could possibly be an issue which is case specific, as I have not been able to reproduce the issue on my end. Please feel free to get in touch with the Support team at support@convergecfd.com (or your existing support contact) with your case setup and someone can look into this. Please use your official email for all correspondence with Convergent Science.

Praveen

May 19, 2022, 17:03		#2
psrikanth New Member Praveen Srikanth Join Date: May 2021 Location: Convergent Science, Madison, WI Posts: 19 Rep Power: 4	Hi, Is the error showing up during the input processing phase? It might be some formatting issue with therm.dat or could be something case specific. You could try opening up the case in Studio and exporting the input files again to see if the problem is with the formatting. Mahdi.Seddiq likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Spurious velocity issue in hybrid version of interFoam and interface tracking method	mykkujinu2201	OpenFOAM Running, Solving & CFD	5	July 19, 2022 16:39
Convergence issue in natural convection problem	chrisf90	FLUENT	5	March 5, 2016 08:30
Simple channel case using cyclicAMI will not converge	cbcoutinho	OpenFOAM Running, Solving & CFD	3	August 4, 2015 12:28
Meshing related issue in Flow EFD	appu	FloEFD, FloWorks & FloTHERM	1	May 22, 2011 08:27
Converge problem for multiphase flow	Jen	FLUENT	4	July 20, 2005 16:52

May 23, 2022, 17:59		#4
psrikanth New Member Praveen Srikanth Join Date: May 2021 Location: Convergent Science, Madison, WI Posts: 19 Rep Power: 4	Hi, It could possibly be an issue which is case specific, as I have not been able to reproduce the issue on my end. Please feel free to get in touch with the Support team at support@convergecfd.com (or your existing support contact) with your case setup and someone can look into this. Please use your official email for all correspondence with Convergent Science. Praveen