particle tracking from Fluent DPM in Ensight

hosseinjanbazi · December 8, 2014, 08:19

Hello

In my project, I have surface injection in Fluent with DPM model:

I exported data for two injection with two different diameters at the same surface. But in Ensight I can see two diameters as one diameter. It seems Ensight can't load two different particle diameters at the same time.

Is this happened to you? or do you have any idea to talk about it?

Thanks,

Hossein

kevincolburn · December 9, 2014, 12:26

Hossein,

Do you have multiple injections?
There is a lack of capability in the Fluent Exporter which is unable to process multiple injections out correctly into the EnSight Measured Particle File Format. In its current form, only one injection will be visible in EnSight (as only 1 injection is actually referenced in the measured file set).

If this is the case, I have a work around for this. You can contact us directly here at CEI for this utility. Hopefully future versions of Fluent will correctly handle the export of multiple particle injections to measured data format (they are aware, but is very low on their long list of things to do).

Regards,

Kevin Colburn

SJSW · November 24, 2016, 08:33

Hi~ I am using ANSYS Fluent 17 to simulate a transient case with multi-phase flow model and DPM model.
I found that CFD-post can't display the results of these two models at the same time.
Could Ensight 10(or a newer version) handle this and produce a animation?
If it's OK, how to do it?
Thank you!

December 8, 2014, 08:19	particle tracking from Fluent DPM in Ensight	#1
hosseinjanbazi New Member Join Date: Dec 2014 Posts: 2 Rep Power: 0	Hello In my project, I have surface injection in Fluent with DPM model: I exported data for two injection with two different diameters at the same surface. But in Ensight I can see two diameters as one diameter. It seems Ensight can't load two different particle diameters at the same time. Is this happened to you? or do you have any idea to talk about it? Thanks, Hossein

December 9, 2014, 12:26	Multiple Injections in Fluent	#2
kevincolburn Senior Member Kevin Colburn Join Date: Mar 2009 Location: The Woodlands, TX Posts: 131 Rep Power: 17	Hossein, Do you have multiple injections? There is a lack of capability in the Fluent Exporter which is unable to process multiple injections out correctly into the EnSight Measured Particle File Format. In its current form, only one injection will be visible in EnSight (as only 1 injection is actually referenced in the measured file set). If this is the case, I have a work around for this. You can contact us directly here at CEI for this utility. Hopefully future versions of Fluent will correctly handle the export of multiple particle injections to measured data format (they are aware, but is very low on their long list of things to do). Regards, Kevin Colburn __________________ Kevin Colburn Computational Engineering International, Inc. www.ceisoftware.com kevin@ensight.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DPM and particle tracking	yahya	FLUENT	3	March 24, 2013 11:31
CFX vs FLUENT for particle tracking simulation	iman	ANSYS	2	August 31, 2012 20:34
DPM UDF particle position using the macro P_POS(p)[i]	dm2747	FLUENT	0	April 17, 2009 01:29
DPM particle size distribution in Fluent	Pete	FLUENT	5	July 7, 2008 12:22
DPM: Particle Tracking	Madhukar	FLUENT	1	July 24, 2007 03:51

November 24, 2016, 08:33		#3
SJSW Senior Member Join Date: Jun 2014 Location: Taiwan Posts: 100 Rep Power: 11	Hi~ I am using ANSYS Fluent 17 to simulate a transient case with multi-phase flow model and DPM model. I found that CFD-post can't display the results of these two models at the same time. Could Ensight 10(or a newer version) handle this and produce a animation? If it's OK, how to do it? Thank you!