Fine Marine - Creating waves
 

I'm doing a study on seakeeping using the Fine Marine software.
However, i'm unable to create the wave needed to provide resistance for simulation. Does anyone have any guides, tutorials or videos that can help me in creating the waves in Fine Marine?

Fine Marine - Creating waves
 

Hello,
Do you have access to the Documentation? You can find a very good description of how to deal with waves in Fine/Marine in the following link:

https://portal.numeca.be/docs/Defaul...CFAQ%7C_____12

Basically you have two options to generate wave:
1. Internal Wave Generator
2. Boundary Condition Wave Generator

By the way, you can also use the C-Wizard to automatically set the seakeeping simulation.

Best Regards,
Rodrigo

please help me too
i got these problem when i trying to simulate seakeeping
Information about the y+ distance :
===================================
- Body Vessel Min 0.1411396E+00 Max 0.1679460E+03
Procedure Cal_Co: Negative volume!
IFace = 1204589 0
FluxV = 6.208115071207692E-011
ICell = 766023
Vol_Cell = 0.000000000000000E+000
Stop
Feature "isis_dynamic" 1
Feature "isiscfd_MPROC_2" 1