|
[Sponsors] |
![]() |
![]() |
#1 |
New Member
|
Hi,
Anyone know why i cannot plot surface contour of velocity magnitude on wall surface of BC? Because at inlet and outlet of BC, contour plot of velocity magnitude can be plot. * I'm using Acusolve as solver and fieldview as post process thanks ![]() |
|
![]() |
![]() |
![]() |
![]() |
#2 |
New Member
AssBurger
Join Date: Jan 2015
Posts: 3
Rep Power: 12 ![]() |
Hi, i'm not sure what are you questioning since i'm relatively new to CFD.
You can plot the countours of the velocity magnitude on a wall easily but an all-blue result is expected since at a wall the velocity is everywhere zero by definition. |
|
![]() |
![]() |
![]() |
![]() |
#3 |
New Member
anonymous
Join Date: Mar 2015
Posts: 25
Rep Power: 11 ![]() |
You need to make a iso-surface to look at the scalar velocity-magnitude. If you are interested in the flow near the wall I would make an iso-surface then set your scalar function to velocity-mag and your iso function (x,y,z) in the direction parallel to the wall you want to look at. Then you could increase the steps to get really close to the wall and use the sweep bar to move the surface.
|
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Axial Velocity Contour in non-planar bend | omidmd | FLUENT | 2 | October 7, 2014 15:22 |
Air diffuser velocity magnitude and direction | kenzosenzo | FLUENT | 17 | March 31, 2014 08:03 |
contour of 3d velocity magnitude as data file | frantov | FLUENT | 1 | January 24, 2008 01:19 |
formula for velocity magnitude | Hai Duc | FLUENT | 0 | January 9, 2008 08:39 |
what the result is negatif pressure at inlet | chong chee nan | FLUENT | 0 | December 29, 2001 06:13 |