CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FloEFD, FloWorks & FloTHERM

Mass convergence problem

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 26, 2014, 01:09
Default Mass convergence problem
  #1
New Member
 
Aibolat
Join Date: Sep 2014
Posts: 2
Rep Power: 0
Aibolat is on a distinguished road
Dear All,
We have a problem with mass convergence when simulating the centrifugal pump performance with casing. We don't know what might the problem. The BCs are volume flow rate at inlet and static pressure ot outlet.
Has anyone encountered that problem?
Aibolat is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
serial/parallel problem in force saving convergence history behest FLUENT 11 July 22, 2014 04:49
Convergence problem Alimohamadi_nasr FLUENT 4 July 26, 2013 10:05
Problem with changing mass flow rate roo FLUENT 3 June 4, 2013 15:53
Low Mixing time Problem Mavier CFX 5 April 29, 2013 01:00
convergence problem in the turbomachinery problem. u k jha CFX 1 September 7, 2010 19:41


All times are GMT -4. The time now is 06:41.