Mesh

Averome · November 1, 2017, 04:10

Hi, all

you need to make a grid in the adsorber, the adsorber has a circular cross-section, the difficulty is that on the section between the adsorbent and the free channel, a grid is not generated along the layer, how can this be done?

Boris_M · December 14, 2017, 10:35

I'm sorry but please bear in mind that FloEFD is used in 100s of applications and not everyone knows what you are talking about when you say "absorber". What exactly are you trying to do?

I cannot even picture what your model looks like. By section between the absorbent and free channel, what do you mean with section? The gap?
What is the absorbent and what free channel?
And along what layer, the boundary layer?

November 1, 2017, 04:10	Mesh	#1
Averome New Member Join Date: Jul 2017 Posts: 18 Rep Power: 9	Hi, all you need to make a grid in the adsorber, the adsorber has a circular cross-section, the difficulty is that on the section between the adsorbent and the free channel, a grid is not generated along the layer, how can this be done?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
Star CCM Overset Mesh Error (Rotating Turbine)	thezack	Siemens	7	October 12, 2016 11:14
[ICEM] surface mesh merging problem	everest	ANSYS Meshing & Geometry	44	April 14, 2016 06:41
[ICEM] Problem making structural mesh on a surface	froztbear	ANSYS Meshing & Geometry	1	November 10, 2011 08:52
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere!	sc298	OpenFOAM Meshing & Mesh Conversion	2	March 27, 2011 21:11

December 14, 2017, 10:35		#2
Boris_M Disabled Join Date: Jul 2009 Posts: 616 Rep Power: 24	I'm sorry but please bear in mind that FloEFD is used in 100s of applications and not everyone knows what you are talking about when you say "absorber". What exactly are you trying to do? I cannot even picture what your model looks like. By section between the absorbent and free channel, what do you mean with section? The gap? What is the absorbent and what free channel? And along what layer, the boundary layer?