FLOEFD What if analysis

yalandolan_cfd · August 5, 2022, 04:51

Currently I am working on fin analysis in FLOEFD with NX 12. However when I filled all the input and output parameters and press the run button on the What if anlaysis, nothing will happen. Calculating notification is on at the bottom left but nothing wil calculated. Also, I couldn't change number of simultaneous runs at same time.
I can do analysis with same goals and get a result with basic run button.
I couldn't understand why that happens.

DB99 · August 13, 2022, 08:04

On the Design Point or Scenario tab is Recalculate checked for each column what-if? Simultaneous runs requires additional solver licenses on another networked computer.

August 5, 2022, 04:51	FLOEFD What if analysis	#1
yalandolan_cfd New Member Kutay Join Date: Aug 2022 Posts: 1 Rep Power: 0	Currently I am working on fin analysis in FLOEFD with NX 12. However when I filled all the input and output parameters and press the run button on the What if anlaysis, nothing will happen. Calculating notification is on at the bottom left but nothing wil calculated. Also, I couldn't change number of simultaneous runs at same time. I can do analysis with same goals and get a result with basic run button. I couldn't understand why that happens.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Force calculation in dynamic FloEFD analysis	MaciekRyd	FloEFD, FloWorks & FloTHERM	0	August 19, 2021 06:47
Urgent - Perform an DISCRETE adjoint analysis in parallel_computation	JPBLourenco	SU2	1	April 23, 2018 10:38
FloEFD: Flow through a nozzle and then into a domain	Supriya_GM	FloEFD, FloWorks & FloTHERM	2	April 19, 2017 01:19
FSI-system coupling: "...same analysis type"?	rjw	CFX	0	March 26, 2017 07:25
ANSYS WORKBENCH Transfer result of one analysis to a new analysis as preload	ingjuanm90	ANSYS	0	July 26, 2016 14:04

August 13, 2022, 08:04		#2
DB99 New Member DB Join Date: Jan 2019 Posts: 28 Rep Power: 7	On the Design Point or Scenario tab is Recalculate checked for each column what-if? Simultaneous runs requires additional solver licenses on another networked computer.