CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FloEFD, FloWorks & FloTHERM

efd-meshing, bc

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   August 8, 2008, 07:30
Default efd-meshing, bc
  #1
Marescu
Guest
 
Posts: n/a
Hello everybody, I started with EFD and I stil cannot find where to find some tool to display mesh. I want to see fluid volume of my model with computational mesh in different cut planes etc..(to chcek cell density in boundary layer and some critical places etc). I also found out that there is some convergence problem when I prescribe heat flux(heat loss)BC on walls in model without solid domain (option "heat conduction in solid" turned off) could you give me please a little help in this? thanks a lot M.
  Reply With Quote

Old   August 8, 2008, 08:56
Default Re: efd-meshing, bc
  #2
Pranesh
Guest
 
Posts: n/a
Click Tools, Options. Click Third Party and select EFD.Lab Options tab Click Display mesh

Now use Results(Post-processing) to see the mesh at different sections

Can you please describe your second problem clearly?

  Reply With Quote

Old   August 11, 2008, 10:40
Default Re: efd-meshing, bc
  #3
marescu
Guest
 
Posts: n/a
thanks for advice, regarding boundary condition: heat conduction in solid is switched off, in table defining wall condition is prescribed roughness and heat flux with negative heat flux boundary condition {W.m-2) inlet BC is Total pressure, outlet static pressure. Solving process is stopped after several iteration with error message. When using positive heat flux or wall temperature as b.c. no problems occur.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Meshing related issue in Flow EFD appu FloEFD, FloWorks & FloTHERM 1 May 22, 2011 09:27
EFD Meshing White Paper John Parry FloEFD, FloWorks & FloTHERM 0 April 10, 2008 11:20
Meshing locks workbench window. andy2o CFX 0 February 1, 2008 06:01
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 12:09
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 12:08


All times are GMT -4. The time now is 09:34.