CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FloEFD, FloWorks & FloTHERM

batch mode

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 23, 2008, 14:51
Default batch mode
  #1
Peter Schaller
Guest
 
Posts: n/a
I would like to study the same model with different flows at the entrance. Up to now I built different konfigurations with different flows each and solved these konfigurations individually. How can one do this in a better way, e.g. a batch mode, where calculation of the next konfiguration starts automatically. In this case I needed not to get up at two in the morning to start the next run. Since the flows differ not too much it would be desirable to use the result of one run as initial condition for the next run. Where to do theese settings? Thanks in advance and best regards Peter
  Reply With Quote

Old   October 2, 2008, 08:40
Default Re: batch mode
  #2
Alain Frydman
Guest
 
Posts: n/a
Hello,

It is quite simple to load several case in batch mode since it is a build in feature of the code.

You just have to go to the flow analysis/solve/Batch run menu and then select the cases you need to run.

You have the same options there than in a direct run (create mesh, run solver,...) and you can choose the order of the run with the up and down buttons.

I hope this will help you.

Best regards

Alain FRYDMAN
  Reply With Quote

Old   October 6, 2008, 04:18
Default Re: batch mode
  #3
Peter Schaller
Guest
 
Posts: n/a
Thank you very much for your hint. I always thought, that the batch mode can only be used for processing the results. Best rgeards Peter Schaller

  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Running Ansys in BAtch Mode kuleuvenstudent ANSYS 1 October 18, 2017 13:11
to run a replayfile in batch mode from UNIX froztbear ANSYS Meshing & Geometry 4 May 13, 2014 09:00
cfdpost in batch mode taichijulie CFX 1 October 25, 2010 16:29
double precision for batch mode Lawrence STAR-CD 2 April 7, 2010 20:10
Prosurf in batch mode Dhruv Siemens 1 September 19, 2005 19:02


All times are GMT -4. The time now is 17:50.