CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)
-   FloEFD, FloWorks & FloTHERM (https://www.cfd-online.com/Forums/floefd-floworks-flotherm/)
-   -   FLOEFD.pro assembly issues (https://www.cfd-online.com/Forums/floefd-floworks-flotherm/70254-floefd-pro-assembly-issues.html)

Zwhiteside November 18, 2009 12:06

FLOEFD.pro assembly issues
 
i am trying to run analysis on a basic airplane shape, but when i run the analysis it only figures things out for one piece of the assembly. Any help would be great.

And sorry if this was brought up elsewhere i didnt manage to find it.

murat December 6, 2009 18:02

Quote:

Originally Posted by Zwhiteside (Post 236774)
i am trying to run analysisc on a basic airplane shape, but when i run the analysis it only figures things out for one piece of the assembly. Any help would be great.

And sorry if this was brought up elsewhere i didnt manage to find it.

Did you check computational domain? Is whole assembly solid? ıf some surface you have to generate all surface as solid

Also you can check component control in FloEFD tree may be some pieces of assembly are disable so you should enable them

Murat


All times are GMT -4. The time now is 00:02.