 |
 |
 |
|
|
|
[Sponsors] | ||||
April 9, 2010, 03:15
|
cryogenic simulation
|
#1 |
|
New Member
Briant
Join Date: Apr 2010
Posts: 1
Rep Power: 0  |
Hello,
I am currently using FloEFD to simulate a two stages cryo head. The first stage works at 35 K with a thermic power of 30 W and the second stage works at 4 K with a thermic power of 1W. On these two stages there are materials to generate a supersonic beam. The results of the simulations are not correct since there are inconsistencies between temperatures and the flux that I should obtained. Does anyone have experience with cryogenic simulation? Does anyone have advice on cryogenic simulations? Thanks in advance, Marc. |
|
|
|
|
 |
| Tags |
| cold head, cryogenic, low temperature |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Replacing mesh while running a simulation | akultane | CFX | 1 | November 15, 2009 13:46 |
| FSI TWO-WAY SIMULATION | Smagmon | CFX | 1 | March 6, 2009 13:24 |
| Continuous vs interrupted simulation | sega | OpenFOAM Running, Solving & CFD | 4 | November 3, 2008 14:29 |
| Fire simulation using FDS from NIST | Jens | Main CFD Forum | 1 | January 22, 2004 01:53 |
| 3-D Contaminant Dispersal Simulation | Apple L S Chan | Main CFD Forum | 1 | December 23, 1998 10:06 |
Linear Mode
