CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FloEFD, FloWorks & FloTHERM

Boundary condition setting

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   March 9, 2011, 22:44
Default Boundary condition setting
  #1
New Member
 
koay kheng kean
Join Date: Mar 2011
Posts: 3
Rep Power: 15
ken87 is on a distinguished road
hi all,
i have run simulation on NACA 0012 airfoil by SW/cosmofloworks external flow and i noticed that difference boundary condition give different result (lift and drag coefficient vs AOA graph)...do i need to use the initial setting boundary condition or set it to wind tunnel test section?? and how to know that the setting is suitable or not?
ken87 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Setting boundary condition for C-grid airfoil quarkz FLUENT 0 December 28, 2010 15:37
vorticity boundary condition bearcharge Main CFD Forum 0 May 14, 2010 12:32
CFX Solver : Sudden crash Hervé CFX 2 June 16, 2008 07:40
[Commercial meshers] Trimmed cell and embedded refinement mesh conversion issues michele OpenFOAM Meshing & Mesh Conversion 2 July 15, 2005 05:15
Pressure Boundary Condition Matt Umbel Main CFD Forum 0 January 11, 2002 11:06


All times are GMT -4. The time now is 16:13.