Hybrid Shallow Water/3D Flow Model

Hamed&honey · September 17, 2012, 04:38

Hi everybody,
which version of Flow-3D support (Hybrid Shallow Water/3D Flow Model) model?
I have problem to setup physics and meshing
best regards

ara_nersesian · September 17, 2012, 08:11

hi
in FLOW-3D Version 10.0 you can do what you want in shallow 3d modling
it have i sample which showing a reiver with a shallow water runing
i am new in flow-3d i made my mesh and geometries plus a horizental pump i want to cheange direction if you knew the answer i will be glad with your repplay

JBurnham · September 18, 2012, 12:00

Combining 3-D mesh blocks (full 3-D solution) with Shallow Water mesh blocks (2-D depth-averaged solution) will be available in v10.1, which is due out later this year. Until then, you must use either the depth-averaged shallow water model OR the full 3-D solution, but not both.

Hamed&honey · September 19, 2012, 02:13

Thank you body for your kind attention,
Now I know what should I do

Hamed&honey · September 19, 2012, 02:21

Thank you body for your kind attention,
Now I know what should I do

Hamed&honey · September 19, 2012, 02:27

Thank you body for your kind attention,
Now I know what should I do

September 17, 2012, 04:38	Hybrid Shallow Water/3D Flow Model	#1
Hamed&honey New Member Ham Ta Join Date: May 2010 Posts: 18 Rep Power: 15	Hi everybody, which version of Flow-3D support (Hybrid Shallow Water/3D Flow Model) model? I have problem to setup physics and meshing best regards

September 17, 2012, 08:11		#2
ara_nersesian New Member ara Join Date: Sep 2012 Posts: 3 Rep Power: 13	hi in FLOW-3D Version 10.0 you can do what you want in shallow 3d modling it have i sample which showing a reiver with a shallow water runing i am new in flow-3d i made my mesh and geometries plus a horizental pump i want to cheange direction if you knew the answer i will be glad with your repplay Hamed&honey likes this.

September 18, 2012, 12:00		#3
JBurnham Senior Member Jeff Burnham Join Date: Apr 2010 Posts: 204 Rep Power: 17	Combining 3-D mesh blocks (full 3-D solution) with Shallow Water mesh blocks (2-D depth-averaged solution) will be available in v10.1, which is due out later this year. Until then, you must use either the depth-averaged shallow water model OR the full 3-D solution, but not both. Hamed&honey likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
What model should I use for a 2D flow around a wing?	Sarin	FLUENT	0	November 12, 2011 21:46
Non-steady flow simplified for use in Vissim	steamerandy	Main CFD Forum	0	October 31, 2011 21:08
Coupling Radiation with Flow model	tongx051	FLUENT	0	October 22, 2011 16:03
lenght and number of nodes for an orifice meter flow problem - k-eps model	fofo	FLUENT	0	November 15, 2009 03:49
Baldwin-Lomax model in wall jet flow	K.S.Chang	Main CFD Forum	0	December 7, 2005 01:51

September 19, 2012, 02:13		#4
Hamed&honey New Member Ham Ta Join Date: May 2010 Posts: 18 Rep Power: 15	Thank you body for your kind attention, Now I know what should I do

September 19, 2012, 02:21		#5
Hamed&honey New Member Ham Ta Join Date: May 2010 Posts: 18 Rep Power: 15	Thank you body for your kind attention, Now I know what should I do

September 19, 2012, 02:27		#6
Hamed&honey New Member Ham Ta Join Date: May 2010 Posts: 18 Rep Power: 15	Thank you body for your kind attention, Now I know what should I do