CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FLOW-3D

change initial condition and restart

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 20, 2012, 22:40
Question change initial condition and restart?
  #1
New Member
 
Join Date: Nov 2012
Posts: 12
Rep Power: 13
dwtme is on a distinguished road
HI everybody,
I have a question about flow-3d. Can I change the initial condition at a time step and then continue running the simulation? i changed the initial condition but it didn't work.
Thanks,
Best regards

Last edited by dwtme; November 28, 2012 at 22:25.
dwtme is offline   Reply With Quote

Old   November 27, 2012, 12:55
Default
  #2
Senior Member
 
Jeff Burnham
Join Date: Apr 2010
Posts: 204
Rep Power: 16
JBurnham is on a distinguished road
You can change initial conditions during a Restart simulation in v10.1, but not earlier versions. If you want to remove some fluid, you can restart with a solid object where you want the fluid to disappear, run for 1e-6 seconds or less, and then restart again and remove the solid.
JBurnham is offline   Reply With Quote

Old   November 27, 2012, 21:13
Default
  #3
New Member
 
Join Date: Nov 2012
Posts: 12
Rep Power: 13
dwtme is on a distinguished road
Dear JBurnham,
Thanks for your reply. My edition is v9.3. Do I have some other methods to solve this problem?
Thanks,
Best regards
dwtme is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
perodic cell zone condition Jim87 FLUENT 6 September 18, 2015 04:53
Initial Condition for FSI Modelling ashtonJ CFX 0 April 28, 2012 04:10
How can I implement temperature jump boundary condition in microchannel walls? sima FLUENT 1 December 8, 2010 09:20
restart Jane Siemens 2 March 26, 2004 03:33
is it possible to change cell type during calc? raymond Siemens 2 September 21, 2001 03:10


All times are GMT -4. The time now is 01:45.