Boundary conditions for sediment scour model

chripasch · June 29, 2016, 11:09

Dear experts,
I am wondering if and how to define boundary conditions when using the sediment scour module of FLOW-3D (v11.1.3.1). When sediment is added, the model somehow needs to have information on the sediments e.g. leaving the domain to solve the advection-diffusion-equation.

I know that one can set sediment concentrations and this is totally clear to me at the upstream boundary. But how to handle the downstream boundary? Is sediment (bed load and suspended load) "automatically" transferred out of the domain? I quite often make the experience that sediment accumulates shortly upstream of the downstream end of the domain.

Thanks a lot for your help and valuable advises

ajv · July 8, 2016, 06:21

If you use an outflow boundary condition the fluid (+sediment) should just be able to exit your simulated domain.

hewida · November 3, 2016, 11:15

what about the finish time and the time step
as if i want to simulate two hours how can i use big time step without error

June 29, 2016, 11:09	Boundary conditions for sediment scour model	#1
chripasch Member Chris Join Date: Jun 2014 Posts: 39 Rep Power: 11	Dear experts, I am wondering if and how to define boundary conditions when using the sediment scour module of FLOW-3D (v11.1.3.1). When sediment is added, the model somehow needs to have information on the sediments e.g. leaving the domain to solve the advection-diffusion-equation. I know that one can set sediment concentrations and this is totally clear to me at the upstream boundary. But how to handle the downstream boundary? Is sediment (bed load and suspended load) "automatically" transferred out of the domain? I quite often make the experience that sediment accumulates shortly upstream of the downstream end of the domain. Thanks a lot for your help and valuable advises

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
sliding mesh problem in CFX	Saima	CFX	46	September 11, 2021 07:38
Problem with SIMPLEC-like finite volume channel flow boundary conditions	ghobold	Main CFD Forum	3	June 15, 2015 11:14
Question about heat transfer coefficient setting for CFX	Anna Tian	CFX	1	June 16, 2013 06:28
RPM in Wind Turbine	Pankaj	CFX	9	November 23, 2009 04:05
Water vapour condensation in CFX-5.7.1	hdj	CFX	1	November 27, 2005 07:15

July 8, 2016, 06:21		#2
ajv New Member AJVellinga Join Date: Mar 2016 Posts: 8 Rep Power: 10	If you use an outflow boundary condition the fluid (+sediment) should just be able to exit your simulated domain.

November 3, 2016, 11:15		#3
hewida New Member hewida Join Date: Jul 2016 Posts: 10 Rep Power: 9	what about the finish time and the time step as if i want to simulate two hours how can i use big time step without error