shallow water model

Aravinth15 · March 20, 2017, 23:52

hello everyone. i need help in setting up shallow water model, for an example ship propagate canals. hope i could get some idea from this here.

bfox48 · March 23, 2017, 14:01

I suggest starting with the information in the user manual. There is also a video on the flow3d users site that walks you through the setup.

Aravinth15 · March 25, 2017, 06:27

I have gone through the shallow water model in the example. but I'm facing a problem when it comes to setting up GMO model coherent with shallow water model. By the way, thanks for your reply.

bfox48 · March 27, 2017, 13:59

I would suggest using a fully 3D model if you are going to use GMO. In shallow water, an object must intersect the bottom of the mesh to be resolved by FAVOR.

March 20, 2017, 23:52	shallow water model	#1
Aravinth15 New Member Aravinth Join Date: Mar 2017 Posts: 9 Rep Power: 9	hello everyone. i need help in setting up shallow water model, for an example ship propagate canals. hope i could get some idea from this here.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Why the water is flowing along the wall by VOF model?	jing113cn	Fluent Multiphase	29	February 28, 2018 02:57
How to model the separation of oil from water, using Ansys CFX?	Ashkan Kashani	CFX	3	April 7, 2016 18:18
Shallow water + VOF	MIT	OpenFOAM Running, Solving & CFD	4	May 26, 2011 20:27
Water vapour condensation in CFX-5.7.1	hdj	CFX	1	November 27, 2005 07:15
uptodate water distribution network	fredius,magige,tanzanian,(e.a)	Main CFD Forum	0	January 27, 2002 07:10

March 23, 2017, 14:01		#2
bfox48 New Member brian Join Date: Apr 2012 Posts: 25 Blog Entries: 1 Rep Power: 14	I suggest starting with the information in the user manual. There is also a video on the flow3d users site that walks you through the setup.

March 25, 2017, 06:27		#3
Aravinth15 New Member Aravinth Join Date: Mar 2017 Posts: 9 Rep Power: 9	I have gone through the shallow water model in the example. but I'm facing a problem when it comes to setting up GMO model coherent with shallow water model. By the way, thanks for your reply.

March 27, 2017, 13:59		#4
bfox48 New Member brian Join Date: Apr 2012 Posts: 25 Blog Entries: 1 Rep Power: 14	I would suggest using a fully 3D model if you are going to use GMO. In shallow water, an object must intersect the bottom of the mesh to be resolved by FAVOR.