inkjets problem

January 6, 2009, 07:59

Hello!

Every inkjets high hand~

I have a big problem. Please tell me how to simulate inkjets.

In order to design the nozzle of piezoelectric micro-droplet nozzle to cause nozzles have the best effect of using.

have any tech papers or example of fluid parameter and shape of nozzle data for FLOW-3D?

My main points of the case is to simulate a droplet on substrate exact,it is very difficult!!!

I have many try is no good and inaccurate.

How to simulate inkjets?

How can I do it?

thanks.

My english is very poor.

p.s cpu time is a terrible.

January 9, 2009, 00:19

Hi Rin,

What version of FLOW-3D are you using?

Michael

January 9, 2009, 04:22

version 9.2

thank you~

January 9, 2009, 10:56

Rin,

Modeling inkjets is always challenging, but is certaily doable in FLOW-3D. However, it is hard to give you advice without seeing the setup. Have you tried contacting the support?

January 6, 2009, 07:59	inkjets problem	#1
rin Guest Posts: n/a	Hello! Every inkjets high hand~ I have a big problem. Please tell me how to simulate inkjets. In order to design the nozzle of piezoelectric micro-droplet nozzle to cause nozzles have the best effect of using. have any tech papers or example of fluid parameter and shape of nozzle data for FLOW-3D? My main points of the case is to simulate a droplet on substrate exact,it is very difficult!!! I have many try is no good and inaccurate. How to simulate inkjets? How can I do it? thanks. My english is very poor. p.s cpu time is a terrible.

January 9, 2009, 00:19	Re: inkjets problem	#2
michael barkhudarov Guest Posts: n/a	Hi Rin, What version of FLOW-3D are you using? Michael

January 9, 2009, 04:22	Re: inkjets problem	#3
rin Guest Posts: n/a	version 9.2 thank you~

January 9, 2009, 10:56	Re: inkjets problem	#4
michael barkhudarov Guest Posts: n/a	Rin, Modeling inkjets is always challenging, but is certaily doable in FLOW-3D. However, it is hard to give you advice without seeing the setup. Have you tried contacting the support?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF compiling problem	Wouter	Fluent UDF and Scheme Programming	6	June 6, 2012 04:43
Gambit - meshing over airfoil wrapping (?) problem	JFDC	FLUENT	1	July 11, 2011 05:59
natural convection problem for a CHT problem	Se-Hee	CFX	2	June 10, 2007 06:29
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13
Is this problem well posed?	Thomas P. Abraham	Main CFD Forum	5	September 8, 1999 14:52