|
[Sponsors] |
3D-Simulation of Water Flow From Nozzle into Air |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
December 26, 2008, 18:09 |
3D-Simulation of Water Flow From Nozzle into Air
|
#1 |
Guest
Posts: n/a
|
Hi,
I want to Compute Height and Trajectory, and Simulate the Water flow from a 3D pipe, having a Inlet and a Nozzle at Outlet, into a Air Domain (Atmosphere). I have designed the 3D pipe and Nozzle in Gambit. I have also Built an Air Envelope around it. But I dont know what boundary condition i should specify and how to go about solving the problem. I have parameters at the Inlet (as a Mass Flow rate or as a Velocity too). I first simulated only the pipe and nozzle and got the output. But I dont know how to go about the path of water flow outside the pipe into atmosphere (Air). It would be great if anyone can throw some light on this issue. Thank you in advance Navin Sampath |
|
January 16, 2009, 16:35 |
Re: 3D-Simulation of Water Flow From Nozzle into A *NM*
|
#2 |
Guest
Posts: n/a
|
|
|
February 26, 2009, 11:46 |
Need an advice!
|
#3 |
Guest
Posts: n/a
|
Moderator please move this thread from this into right category on www.cfd-online.com
What is a good amount to borrow when applying for an auto loan online? I'm about to apply for an auto loan online at http://pcarrs.cn/apply-auto-loan.html I am not sure what amount to ask for or loan term. I can afford $250-$300 a month. Any ideas? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Two-phase air water flow problems by activating Wall Lubrication Force | challenger85 | CFX | 5 | November 5, 2009 06:44 |
air bubble is disappear increasing time using vof | xujjun | CFX | 9 | June 9, 2009 08:59 |
Spray Simulation considering the nozzle flow | farbfilm | OpenFOAM Running, Solving & CFD | 0 | March 27, 2009 09:21 |
flow simulation across a small fan | jane luo | Main CFD Forum | 15 | April 12, 2004 18:49 |
Help!!!problems in air jet into water bath | kim | FLUENT | 4 | June 9, 2003 08:04 |