CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FLOW-3D

Need support for GAMBIT geometry

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 18, 2009, 21:59
Default Need support for GAMBIT geometry
  #1
srbbd
Guest
 
Posts: n/a
In my research , I need to do a CFD model using GAMBIT and FLUENT. My flow is water and this is an open channel flow. I draw geometry in GAMBIT up to face stage. I considered x, y and z value and I have 7 faces. My query is: (1) Do I need to do 2D modelling or (2) 3D modelling. (3) In case of 2D or 3D modelling what I need to do next?

If you need any further information, please let me know. I am eagerly waiting for your reply.

  Reply With Quote

Old   March 9, 2009, 15:26
Default Re: Need support for GAMBIT geometry
  #2
Navin
Guest
 
Posts: n/a
What is the type of crosection of the channel.. If you want a square / rectangular channel.. 2D is enough, but to consider the wall roughness and precise values you need to do a 3D modelling, more over If it is a circular pipe or channel u must use 3D model.

Define the Boundary Conditions in Gambit Inlet - Velocity / Presuure Inlet (as you may wish) Outlet - Pressure outlet / Outflow (as per your requirement) Wall - rest all surfaces that constricts the flow.

Then Define the Continum as Fluid Export the Model as a Mesh file.. Then you must be ready to start setting up an problem in Fluent.

I hope this was informatory, any Further queiries mail me..
  Reply With Quote

Old   March 9, 2009, 23:15
Default Re: Need support for GAMBIT geometry
  #3
srbbd
Guest
 
Posts: n/a
Hi Navin

thanks for your reply. I need lot of advise regarding GAMBIT & FLUENT as I am very new in this area.

Could you please provide me your email address so that I can send photograph of my model shape. My email is: srbbd@yahoo.com. I tried to send your gmail address but that email bounce back with message "permanent fatal error".

Your help will be highly appreciated. & I am waiting for your reply.

  Reply With Quote

Old   March 12, 2009, 20:16
Default Re: Need support for GAMBIT geometry
  #4
srbbd
Guest
 
Posts: n/a
Navin, your email is not working, could u pls have a check. I tried so many times to send an email but it bounce back. my address is srbbd@yahoo.com
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[ICEM] O-grid around wing geometry Anorky ANSYS Meshing & Geometry 15 November 27, 2017 14:43
Problem Importing Geometry ProE to CFX fatb0y CFX 3 January 14, 2012 20:42
[Gmsh] Problem meshing an imported geometry Alicia OpenFOAM Meshing & Mesh Conversion 0 March 30, 2010 05:53
Simulation of Flow through Complex 3D Geometry EmersonKB CFX 5 July 2, 2009 09:17
vitual _ real deneb FLUENT 3 January 22, 2007 05:31


All times are GMT -4. The time now is 12:51.