Mesh grid a control volume of propeller

vsun · October 25, 2009, 03:19

Hello everybody,
I'm a student and doing a project about designing propeller, but i'm not sure which software is best for mesh grid a control volume ( a cylinder subtract with propeller shape) of propeller. I'm trying with Gambit, but i see it's difficult. Plese help me which software (Gambit,Gridgen,Grid pro)is most strong in mesh grid and web site for free download. Thank u.

MuxaB · October 25, 2009, 18:54

vsun,

I am not sure you will find a satisfactory answer to this question on the FLOW-3D forum unless you want to consider trying FLOW-3D for this work.

Michael

vsun · October 26, 2009, 00:47

Thank u. I'm sorry, I posted in wrong topic. Can FLOW-3D solve my problem ? If FLOW-3D can do it, i'll try this new software.

MuxaB · October 26, 2009, 23:01

it might. What exactly are you modeling? and air propeller or a water one? how many revolutions do you need to model?

October 25, 2009, 03:19	Mesh grid a control volume of propeller	#1
vsun New Member VINH NGUYEN Join Date: Oct 2009 Posts: 5 Rep Power: 16	Hello everybody, I'm a student and doing a project about designing propeller, but i'm not sure which software is best for mesh grid a control volume ( a cylinder subtract with propeller shape) of propeller. I'm trying with Gambit, but i see it's difficult. Plese help me which software (Gambit,Gridgen,Grid pro)is most strong in mesh grid and web site for free download. Thank u.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Dynamic mesh & Negative volume in 3D	mahzironrazak	FLUENT	97	December 28, 2020 22:09
Calculation of the Governing Equations	Mihail	CFX	7	September 7, 2014 06:27
air bubble is disappear increasing time using vof	xujjun	CFX	9	June 9, 2009 07:59
Cannot mesh volume	Wendy Tjan	FLUENT	4	December 11, 2008 06:03
unstructured vs. structured grids	Frank Muldoon	Main CFD Forum	1	January 5, 1999 10:09

October 25, 2009, 18:54		#2
MuxaB Senior Member michael barkhudarov Join Date: Mar 2009 Location: Sante Fe, New Mexico, USA Posts: 336 Rep Power: 18	vsun, I am not sure you will find a satisfactory answer to this question on the FLOW-3D forum unless you want to consider trying FLOW-3D for this work. Michael

October 26, 2009, 00:47		#3
vsun New Member VINH NGUYEN Join Date: Oct 2009 Posts: 5 Rep Power: 16	Thank u. I'm sorry, I posted in wrong topic. Can FLOW-3D solve my problem ? If FLOW-3D can do it, i'll try this new software.

October 26, 2009, 23:01		#4
MuxaB Senior Member michael barkhudarov Join Date: Mar 2009 Location: Sante Fe, New Mexico, USA Posts: 336 Rep Power: 18	it might. What exactly are you modeling? and air propeller or a water one? how many revolutions do you need to model?