CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > FLOW-3D

F3d_boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 27, 2010, 12:51
Default F3d_boundary condition
  #1
New Member
 
federico
Join Date: Aug 2009
Posts: 2
Rep Power: 0
arsatan80 is on a distinguished road
Hello to everybody.

Is Flow3d able to model an outlet of tunnel? The flow inside the tunnel

is pressurized, while after the outlet is unsubmerged.

In other hand, at the beginning of the mesh is possible to assign both

pressure ( height of the fluid ) and mean velocity?

Have you ever been this case?

Thanks in advance.
arsatan80 is offline   Reply With Quote

Old   January 28, 2010, 12:36
Default
  #2
Senior Member
 
michael barkhudarov
Join Date: Mar 2009
Location: Sante Fe, New Mexico, USA
Posts: 336
Rep Power: 18
MuxaB is on a distinguished road
Quote:
Originally Posted by arsatan80 View Post
Hello to everybody.

Is Flow3d able to model an outlet of tunnel? The flow inside the tunnel

is pressurized, while after the outlet is unsubmerged.

In other hand, at the beginning of the mesh is possible to assign both

pressure ( height of the fluid ) and mean velocity?

Have you ever been this case?

Thanks in advance.
Hi,

You can't have both pressure and velocity at the same boundary. You can define fluid height and pressure OR velocity at the inlet. Regarding the downstream boundary, you could also set fluid height and pressure at the outlet to correspond to the free stream boundary condition.
MuxaB is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CFX Solver : Sudden crash Hervé CFX 2 June 16, 2008 07:40
Airfoil boundary condition Frank Main CFD Forum 1 April 21, 2008 19:36
Slip boundary condition what is inside normunds OpenFOAM Running, Solving & CFD 2 June 4, 2007 07:45
Pressure Boundary Condition Matt Umbel Main CFD Forum 0 January 11, 2002 11:06
The Boundary Condition about the Flat Plate boing Main CFD Forum 1 January 6, 2002 17:53


All times are GMT -4. The time now is 10:07.