9.4 version...is it possible to analyse the output of a 9.3 simulation??

sdr · February 9, 2010, 06:56

Hello users, I wonder to know if it is possible to analyse a simulation made with the 9.3, or older version of Flow3D, using the 9.4 without running again the simulation...

ignatz · February 9, 2010, 11:08

It should be possible, sdr...have you tried and it failed?

sdr · February 9, 2010, 11:22

yes, I try and I get a message which says "Failed to process guipost"...
Can you help me?

ignatz · February 9, 2010, 11:33

Hmm...I just tried and it worked fine. Have you tried contacting FLOW-3D support?

MuxaB · February 10, 2010, 09:39

See if you can run the 9.4 post-processor from the command line:

runpost <flsgrf file extension>

If it still does not work, send the error message that you get from this operation.

sdr · February 11, 2010, 09:46

thank you Michael...I will let you know...

sdr · February 12, 2010, 04:57

it's ok now...the problem was in the check of the license using the network...just a connection problem Everything is fine now...
Thank you

February 9, 2010, 06:56	9.4 version...is it possible to analyse the output of a 9.3 simulation??	#1
sdr New Member Join Date: Feb 2010 Posts: 4 Rep Power: 16	Hello users, I wonder to know if it is possible to analyse a simulation made with the 9.3, or older version of Flow3D, using the 9.4 without running again the simulation...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
paraFoam reader for OpenFOAM 1.6	smart	OpenFOAM Installation	13	November 16, 2009 21:41
esqr - definition changed from version 9.2 to 9.3?	Andreas	FLOW-3D	1	February 8, 2009 23:23
Output power from simulation	JSM	FLUENT	0	November 27, 2008 06:04
MFX output of simulation time	Richard	CFX	0	October 10, 2008 09:50
Output Excel File in Transient Simulation	Soon	CFX	5	July 11, 2005 06:11

February 9, 2010, 11:08		#2
ignatz Member Join Date: Jan 2010 Posts: 39 Rep Power: 16	It should be possible, sdr...have you tried and it failed?

February 9, 2010, 11:22		#3
sdr New Member Join Date: Feb 2010 Posts: 4 Rep Power: 16	yes, I try and I get a message which says "Failed to process guipost"... Can you help me?

February 9, 2010, 11:33		#4
ignatz Member Join Date: Jan 2010 Posts: 39 Rep Power: 16	Hmm...I just tried and it worked fine. Have you tried contacting FLOW-3D support?

February 10, 2010, 09:39		#5
MuxaB Senior Member michael barkhudarov Join Date: Mar 2009 Location: Sante Fe, New Mexico, USA Posts: 336 Rep Power: 18	See if you can run the 9.4 post-processor from the command line: runpost <flsgrf file extension> If it still does not work, send the error message that you get from this operation.

February 11, 2010, 09:46		#6
sdr New Member Join Date: Feb 2010 Posts: 4 Rep Power: 16	thank you Michael...I will let you know...

February 12, 2010, 04:57		#7
sdr New Member Join Date: Feb 2010 Posts: 4 Rep Power: 16	it's ok now...the problem was in the check of the license using the network...just a connection problem Everything is fine now... Thank you