CFD Online Discussion Forums

CFD Online Discussion Forums (https://www.cfd-online.com/Forums/)

- FLOW-3D (https://www.cfd-online.com/Forums/flow-3d/)

- - mesh problem (https://www.cfd-online.com/Forums/flow-3d/74704-mesh-problem.html)

bojiezhang

April 6, 2010 21:21

mesh problem

Hello everyone: I want to mesh by fixing every point,but the flow3d software will automatically divide the cell again.so the total cell is more than I want to mesh.who knows how to solve it. thank you!

ck5285

April 6, 2010 22:29

you can manually define number of cell needed (# of Cells) between the fix points. this will help to you control total mesh count later. hope this help.

bojiezhang

April 6, 2010 23:29

Quote:

Originally Posted by ck5285 (Post 253451)

you can manually define number of cell needed (# of Cells) between the fix points. this will help to you control total mesh count later. hope this help.

Thank you for your reply.I have solved this problem through your suggestion!

ck5285

April 7, 2010 23:28

you're welcome :)

All times are GMT -4. The time now is 23:01.