A big problem about scour around pile

Ghirghidov · November 29, 2010, 03:53

Dear mohammad

What actually you want to add into F3D?

Regards.

mamadnamaie · November 30, 2010, 03:19

hello.packed sediment concentration. should i gain it from experiment. i have a flume with 30 cm sediment into it

river80 · February 4, 2011, 04:07

Hi dear Ghirghidov
i have a question
in initial, you input 991 for sediment concentration
how you calculate it?
Many thanks and best regards,
Hosain

Ghirghidov · February 4, 2011, 08:19

Dear Hosai.

I used it from the example. IMHO you could use 100 or 1000 does not matter.

Regards.

Ghirghidov · April 13, 2011, 05:37

Dear obama549.

The scouring rate depends on sediment tipe and discharge ond many other things.

Regards.

misle · February 23, 2012, 04:07

please e-mail to me.. prepin and stl.. misle@hotmail.co.kr

Regards.

hans_ina · April 9, 2012, 03:54

Quote:

Originally Posted by bojiezhang

hello everyone:
I have a big problem about scour around pile.The sand aroud the pile was scoured quickly by the water.I do not which parameter I set wrong or where I misset.Ask for help,thank you for advance!

Hi bojiezhang,

I have same problem too with F3D 9.2, think you can share the problem. i modeling scour around rectangular pile group.. but all sediment going up by wave.. i have limited the depth of sediment but unsatisfied result

meangreen · July 3, 2012, 16:53

Can someone email me the multiphase flow theory that is used in flow3d?

cqlamarche{at}gmail{dot}com

Thanks,

Casey

November 30, 2010, 03:19	hello	#22
mamadnamaie New Member mohammad Join Date: Mar 2010 Posts: 3 Rep Power: 16	hello.packed sediment concentration. should i gain it from experiment. i have a flume with 30 cm sediment into it

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Adiabatic and Rotating wall (Convection problem)	ParodDav	CFX	5	April 29, 2007 19:13
Solver problem with a big amount of reactions	Leonid	CFX	2	April 9, 2007 10:38
I have a big problem of convergence, please help !	amel	FLUENT	3	February 15, 2007 15:32
ICEM meshing problem	Forrest	CFX	4	May 25, 2005 18:37
problem with using colocated code	Jack	Main CFD Forum	0	December 15, 2002 00:15

November 29, 2010, 03:53		#21
Ghirghidov Member Armen A. Ghirghidov Join Date: Mar 2009 Posts: 50 Rep Power: 17	Dear mohammad What actually you want to add into F3D? Regards.

February 4, 2011, 04:07		#23
river80 New Member hos Join Date: Apr 2010 Posts: 5 Rep Power: 16	Hi dear Ghirghidov i have a question in initial, you input 991 for sediment concentration how you calculate it? Many thanks and best regards, Hosain

February 4, 2011, 08:19		#24
Ghirghidov Member Armen A. Ghirghidov Join Date: Mar 2009 Posts: 50 Rep Power: 17	Dear Hosai. I used it from the example. IMHO you could use 100 or 1000 does not matter. Regards.

April 13, 2011, 05:37		#25
Ghirghidov Member Armen A. Ghirghidov Join Date: Mar 2009 Posts: 50 Rep Power: 17	Dear obama549. The scouring rate depends on sediment tipe and discharge ond many other things. Regards.

February 23, 2012, 04:07		#26
misle New Member Junsik Kim Join Date: Dec 2011 Posts: 1 Rep Power: 0	please e-mail to me.. prepin and stl.. misle@hotmail.co.kr Regards.

July 3, 2012, 16:53		#28
meangreen Member Casey Join Date: Jun 2009 Posts: 98 Rep Power: 16	Can someone email me the multiphase flow theory that is used in flow3d? cqlamarche{at}gmail{dot}com Thanks, Casey