CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

dynamic mesh setup

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 7, 2013, 05:34
Default dynamic mesh setup
  #1
New Member
 
Rohit Jain
Join Date: Feb 2013
Posts: 13
Rep Power: 13
rohit.jain092 is on a distinguished road
Hi guys.
I am trying to generate 2D sinusoidal waves in fluent with the help of a oscillating wall (dynamic mesh). I am using a VOF model. I have written the udf and it works fine.
But when i run the calculation, after about 50 time steps, it shows error like pressure correction, velocity field diverging etc.

I am using a rectangular mesh. I have tried both iterative and non iterative solutions. I have attached a picture of my mesh around the moving wall. The vertical wall on the left in the picture is the moving wall. Can anybody please explain why the errors are occurring.

Also how is the amplitude of the waves generated related to the amplitude of the moving wall. I want to generate short wavelength and short period waves. What equation of motion of the wall should i use.

Thanks for your time.
Attached Images
File Type: jpg Untitled.jpg (9.3 KB, 14 views)
rohit.jain092 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Dynamic mesh is not getting updated. cardio FLUENT 1 May 20, 2014 09:41
Update of the variables after dynamic mesh motion. gtg258f OpenFOAM Programming & Development 9 January 18, 2014 11:08
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 07:42
dynamic mesh refinement and rhoCentralFoam ChrisA OpenFOAM Running, Solving & CFD 1 March 21, 2013 09:00
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! sc298 OpenFOAM Meshing & Mesh Conversion 2 March 27, 2011 22:11


All times are GMT -4. The time now is 23:54.