Convergence issues with Mixture model, when gas treatment changed to ideal gas

DVS · September 22, 2013, 15:20

Hello,

I have been trying to simulate gas induction in a nozzle-ejector geometry. Where gas is en trained because of the flowing water jet. I set up a simpler run where gas density was taken constant and the run converged. However, when I changed the gas behavior to ideal gas it is showing ÄMG Divergence error in all equations. I have been tried first and second order discretization schemes but still nothing. Please help. Thank you.

mhdmk · September 23, 2013, 11:59

try small mesh size and under relax all variables specially density and volume fraction

September 22, 2013, 15:20	Convergence issues with Mixture model, when gas treatment changed to ideal gas	#1
DVS New Member Deepankar V Sharma Join Date: Sep 2013 Posts: 1 Rep Power: 0	Hello, I have been trying to simulate gas induction in a nozzle-ejector geometry. Where gas is en trained because of the flowing water jet. I set up a simpler run where gas density was taken constant and the run converged. However, when I changed the gas behavior to ideal gas it is showing ÄMG Divergence error in all equations. I have been tried first and second order discretization schemes but still nothing. Please help. Thank you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Calculation of the Governing Equations	Mihail	CFX	7	September 7, 2014 06:27
Two-Phase Buoyant Flow Issue	Miguel Baritto	CFX	4	August 31, 2006 12:02
convergence of mixture model	major	FLUENT	2	October 5, 2004 21:28
Gas pressure question	Dan Moskal	Main CFD Forum	0	October 24, 2002 22:02
PDF combustion model to simulate reaction of gas i	Mark	FLUENT	0	August 4, 2001 11:07

September 23, 2013, 11:59		#2
mhdmk New Member mehrdad Join Date: Feb 2011 Posts: 20 Rep Power: 15	try small mesh size and under relax all variables specially density and volume fraction