CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

how to set secondary phase for an inlet?

Register Blogs Members List Search Today's Posts Mark Forums Read

Like Tree1Likes
  • 1 Post By sudhakar1127

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 9, 2014, 01:22
Unhappy how to set secondary phase for an inlet?
  #1
New Member
 
Ali Kiani
Join Date: Oct 2013
Location: Tehran, Iran
Posts: 11
Rep Power: 12
alikiani is on a distinguished road
Hello friends,
I'm simulating a multiphase problem, but I don't know how to set the secondary phase for an inlet.
please help me!
I have tried many tutorials but none of them was useful.
Please explain step by step!
regards!
I use fluent 12.
alikiani is offline   Reply With Quote

Old   January 20, 2014, 02:24
Default
  #2
New Member
 
T.Sudhakar
Join Date: Aug 2013
Location: INDIA
Posts: 2
Rep Power: 0
sudhakar1127 is on a distinguished road
hi,

At Inlet, in phase options select phase-2, then it will display another settings box in that select multiphase volume fraction set to 1.
boundary conditions--> inlet--> phase--> select phase2--> multiphase--> volume fraction--> set the value as 1
cfluid likes this.
sudhakar1127 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
fan driven flow, Fan BC validation (getting lost) soonic OpenFOAM Running, Solving & CFD 0 July 7, 2013 20:16
Set inlet velocity and pressure in cavitational model GerardX89 FLUENT 1 July 5, 2012 17:17
How to set up the inlet boundary condition for a low pressure case? beastieboys6 FLUENT 3 April 10, 2012 23:46
Secondary inlet Martin_D Fidelity CFD 4 May 23, 2011 09:33
how to set the inlet as non-uniform? egerland OpenFOAM Pre-Processing 2 June 29, 2010 03:51


All times are GMT -4. The time now is 07:15.