 |
 |
 |
|
|
|
[Sponsors] | ||||
Temperature of solid in free board of bubbling fluidized bed |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
February 2, 2014, 11:14
|
Temperature of solid in free board of bubbling fluidized bed
|
#1 |
|
New Member
maharastra
Join Date: Aug 2012
Posts: 1
Rep Power: 0  |
Hello everyone
I am simulating a 2D bubbling fluidized bed using Eulerian-Eulerian two phase flow to know heat transfer and hydrodynamics. the inlet gas temperature is maintain at 473 k and solids particles are at 300 k. from the post processing i'm getting correct temperature for solid up to solid present in the bed, after that i'm getting temperature of solid equal to temperature of gas in the free board even their is no solid present in the free board. why i'm getting this and what should be the temperature of solid in the free board |
|
|
|
|
|
April 12, 2014, 07:21
|
|
#2 |
|
Member
Nazim
Join Date: Oct 2013
Posts: 93
Rep Power: 12 |
R U spraying the water from above
|
|
|
|
|
|
|
| Tags |
| eulerian-eulerian model, fluidized beds, heat transfer |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| free stream temperature | qzhu | FLUENT | 5 | June 10, 2015 03:55 |
| Packed bed temperature profile | João fernandes | FLUENT | 1 | December 25, 2008 05:09 |
| Convective Heat Transfer - Heat Exchanger | Mark | CFX | 6 | November 15, 2004 15:55 |
| Bubbling Fluidized Bed reactor burning biomass | Mattias | FLUENT | 6 | June 8, 2004 02:53 |
| Temperature Distribution on a circuit board | Blackadder | Main CFD Forum | 1 | March 27, 2003 11:32 |
Linear Mode
