Interphase_Heat_Coefficient: not a generic method

Luis Delgado · April 30, 2014, 12:43

Hi, I want to simulate a boiling process, but when I running the model, it set the next error:Interphase_Heat_Coefficient: not a generic method

What that mean?
Thanks.

green · December 11, 2015, 19:58

Hi, im facing the same error when using evaporation/condensation model in the two eulerian phase flow simulation. Didt you figured out what was wrong?

BR, Matej

rampal · January 19, 2016, 14:58

Hello friends, I'm facing the same problem "Interphase_Heat_Coefficient: not a generic method" after initialization when doing simulation using Eulerian boiling model. If anyone know the solution of this error, please share.

V_J123 · May 23, 2016, 04:05

Check if you have this setting:

Phases-->Interaction-->Mass tab--> liquid to vapour.

December 11, 2015, 19:58	interphase_heat_coefficient: not a generic method	#2
green New Member Join Date: Sep 2010 Posts: 3 Rep Power: 17	Hi, im facing the same error when using evaporation/condensation model in the two eulerian phase flow simulation. Didt you figured out what was wrong? BR, Matej

May 23, 2016, 04:05		#4
V_J123 New Member Vijay Jangid Join Date: May 2016 Posts: 2 Rep Power: 0	Check if you have this setting: Phases-->Interaction-->Mass tab--> liquid to vapour. dxm2008 likes this.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
On the alpha Eqn of VOF method when using Immersed boundary method in OpenFOAM	keepfit	OpenFOAM	4	January 31, 2014 15:32
Inaccurate gradient results from continuous Adjoint method	Yminjo	SU2	1	January 11, 2014 23:08
multiphaseEulerFoam: method mag(...) withing method solveAlphase()	maybee	OpenFOAM Programming & Development	0	December 21, 2013 11:13
[Gmsh] discretizer - gmshToFoam	Andyjoe	OpenFOAM Meshing & Mesh Conversion	13	March 14, 2012 05:35
Code for most powerfull FDV Method	D.S.Nasan	Main CFD Forum	6	September 4, 2008 03:08

April 30, 2014, 12:43	Interphase_Heat_Coefficient: not a generic method	#1
Luis Delgado New Member Luis Delgado Join Date: Oct 2013 Posts: 19 Rep Power: 14	Hi, I want to simulate a boiling process, but when I running the model, it set the next error:Interphase_Heat_Coefficient: not a generic method What that mean? Thanks.

January 19, 2016, 14:58	Interphase_Heat_Coefficient: not a generic method	#3
rampal Member Ram Kumar Pal Join Date: Apr 2015 Posts: 38 Rep Power: 12	Hello friends, I'm facing the same problem "Interphase_Heat_Coefficient: not a generic method" after initialization when doing simulation using Eulerian boiling model. If anyone know the solution of this error, please share.