Wall Shear Stress calculation

DudaAPD · October 23, 2014, 07:56

Hi all,

I want to have the total wall shear stress (WSS). Fluent will give me the WSS area-weighted for each fluid: gas and liquid. Would it be correct to sum the WSS given from fluent for the liquid and the gas? ( WSS_l + WSS_g = WSS_total)?

I can't find anywhere saying how the WSS is calculated by Fluent, hence I don't know if the volume fractions are being used or how the perimeter is used for each phase.

Thanks in advance for the help!

black key · October 26, 2014, 02:15

Calculate the wall shear stress from Forces in Reports.
This will give you the pressure force and the viscous force. This will be the total viscous force of the two liquids.

DudaAPD · October 27, 2014, 11:21

Thank you Black Key. It is actually ok to do as I did. I´ve compared with the viscous force at the wall as you said, and it was good.

October 23, 2014, 07:56	Wall Shear Stress calculation	#1
DudaAPD New Member Luiz Eduardo Join Date: May 2010 Posts: 19 Rep Power: 15	Hi all, I want to have the total wall shear stress (WSS). Fluent will give me the WSS area-weighted for each fluid: gas and liquid. Would it be correct to sum the WSS given from fluent for the liquid and the gas? ( WSS_l + WSS_g = WSS_total)? I can't find anywhere saying how the WSS is calculated by Fluent, hence I don't know if the volume fractions are being used or how the perimeter is used for each phase. Thanks in advance for the help!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Measuring wall shear stress in bend pipe	liguifan	OpenFOAM	70	December 9, 2015 03:49
What is wall shear stress and shear strain rate?	warlocklw	Main CFD Forum	2	May 21, 2012 06:16
Wall shear stress	GamFlu	Main CFD Forum	0	June 11, 2011 04:33
UDF for wall slipping	HFLUENT	Fluent UDF and Scheme Programming	0	April 27, 2011 12:03
relationship between wall shear stress and TKE	winter	FLUENT	0	December 11, 2007 17:11

October 26, 2014, 02:15		#2
black key New Member Join Date: Nov 2012 Posts: 4 Rep Power: 13	Calculate the wall shear stress from Forces in Reports. This will give you the pressure force and the viscous force. This will be the total viscous force of the two liquids.

October 27, 2014, 11:21		#3
DudaAPD New Member Luiz Eduardo Join Date: May 2010 Posts: 19 Rep Power: 15	Thank you Black Key. It is actually ok to do as I did. I´ve compared with the viscous force at the wall as you said, and it was good.