 |
 |
 |
|
|
|
[Sponsors] | ||||
How to create a 2d model of tuble with a center hole |
 |
|
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
November 19, 2014, 17:29
|
How to create a 2d model of tuble with a center hole
|
#1 |
|
New Member
Haijun Hu
Join Date: Sep 2014
Posts: 8
Rep Power: 11  |
Hi guys
I 'd like to create a geometry of 2d pipe with a role inside. the calculating domain is a hollow pipe. May I use 2d axisymmetric geometry to model? If possible, please give me some advices. The Axis of symmetry is outside the hollow pipe. Fluent cannot accept it. Thank you. |
|
|
|
|
|
| Tags |
| 2d modelling, hollow cylinder |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Use of k-epsilon and k-omega Models | Jade M | Main CFD Forum | 40 | January 27, 2023 07:18 |
| Model assemble - meshing strategy | Aeronautics El. K. | Pointwise & Gridgen | 7 | August 8, 2015 03:30 |
| Low Reynolds k-epsilon model | YJZ | ANSYS | 1 | August 20, 2010 13:57 |
| Data Center model | jayantha | CFX | 1 | July 7, 2009 03:00 |
| The center on cylindric 2d model | S.H. Lee | Main CFD Forum | 0 | May 15, 2002 23:27 |
Linear Mode
