Scour simulation using FLUENT
 

Hello;
Could you please help me?

I want to do a simulation to study the scour around a bridge pier using ANSYS FLUENT. My geometry has been shown in the attached picture. I know how to define the sand material. I used Eulerian granular model, but unfortunately a got no result.
I uploaded two pictures I got from the Internet showing the scour simulation I want to do which is done by other researcher using FLUENT.
I will be very thankful if anybody can help me. Regards.

My geometry:
http://im62.gulfup.com/tU8NSN.jpg
-----------------
http://im62.gulfup.com/Q7awAl.jpg
http://im62.gulfup.com/qqA4dk.jpg

hi, i am trying to simulate scouring around groyne in straight flume. can you help me with udf for defining the soil material?

does it possible to simulate the material of bed and getting scour depth from fluent

I think it is hard to do that in FLUENT. I tried but unfortunately, I got no results. It is recommended to use FLOW 3D.

Thanks a lot for your reply
Did you use flow 3 d if you could send my an example solved by flow 3 d I will aperiate this
Thanks for you care