open channel inizialization with water surface parallel to the bed
Dear all,
I would like to simulate an open channel flow, but I have a problem in the initialization. As initial condition I would like to have a water profile parallel to the bed, thus I impose a free surface depth at the inlet and at the outlet. I use the FLAT initialization for open channel flow, but the free surface which is generated is horizontal, and not parallel to the bed. I have tried to use both hybrid and standard initialization, starting both from the inlet and from the outlet, and also selecting "all zones". Do you have advices? Thank you |
All times are GMT -4. The time now is 05:11. |