CFD Online Logo CFD Online URL
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

Fluent Open Channel Convergence Monitors

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Search this Thread Display Modes
Old   February 5, 2016, 18:34
Default Fluent Open Channel Convergence Monitors
New Member
Allen Hammack
Join Date: Sep 2009
Posts: 7
Rep Power: 16
ahammack is on a distinguished road
I am simulating water flow over a spillway using the volume of fluid (open channel) module in Fluent. I would like to create convergence monitors in addition to the default monitors. Particularly, I'd like to be able to monitor the motion of the free surface at a particular transect during simulations, but I don't know how to set up such a monitor. Could someone help me set up such a solution monitor?

Also, any suggestions for further solution monitors for open channel flow and how to set those up would be greatly appreciated.

ahammack is offline   Reply With Quote


fluent, monitors, open channel

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[swak4Foam] swak4foam building problem GGerber OpenFOAM Community Contributions 54 April 24, 2015 16:02
CFX overwhelming Fluent in mass convergence of boundary layer separation case Pierre1 FLUENT 7 March 26, 2015 21:43
Open Channel Flow ElanMorin FLUENT 4 February 25, 2015 16:26
OpenFOAM without MPI kokizzu OpenFOAM Installation 4 May 26, 2014 09:17
Question on the boundary condition for open channel flow, please help! ripperjack OpenFOAM Running, Solving & CFD 0 September 13, 2013 11:44

All times are GMT -4. The time now is 19:52.