Heat pipe wickless-simulation on Fluent-Multiphase
1 Attachment(s)
Hi,
I'm doing my bachelor project and need to validate my results by simulate the temperature drop across the -heat pipe. I read a lot about this simulation and end up that i need UDF to simulate the condenser and the evaporator section in a right way. I don't have have experience in fluent to manage it, and many previous udfs have problem in condensation section. Could anyone help me with tutorials,idea or solution of this problem? Please, finds attached the simple heat pipe working principle. Regards, A.k |
Thread closed.
I succeeded in simulation of a 2d heat pipe using fluent 17 VOF multiphase model with hooking UDF with the case. The UDF didn't work on Ansys 16 due to some bug in the program, so you should use ANSYS 15 or 17 instead. If someone need help in the simulation, write your email and i will send some good resources. |
heat pipe simulation
Quote:
Thank you. |
Quote:
Could you please open your UDF publicly? Then more people could benefit from you! :) |
Udf
1 Attachment(s)
Quote:
|
Quote:
|
|
Quote:
(arulkumarkce@gmail.com). Sent from my SM-J700F using CFD Online Forum mobile app |
Need a resources for heat pipe simulation
please send the resources to mail id, pritamdgole@gmail.com
Quote:
|
Quote:
I would greatly appreciate it. |
Need a resources for heat pipe simulation
could u pls send to me code for udf to simulate evaporation and condenstion in heat pipe email
czakareya@yahoo.com |
Need a resources for heat pipe simulation
Quote:
email czakareya@yahoo.com |
bachelor's thesis seeking help
hi everyone, i'm currently doing my bachelor's thesis on this subject as well. for some reason, my set up always diverges. would anyone be kind to share their case and batch files so i could compare the parameters which i may have set wrongly?
thanks in advance! |
Could you please send me the simulation files, UDF and other details to my email. I would greatly appreciate it.
sajjadahangar@gmail.com |
Quote:
sajjadahangar@gmail.com |
Quote:
Good luck |
Could you please send me some useful resources about your case? like UDF, models and so on? I would appreciate it very much. elvislf@qq.com
|
Heat pipe-evaporation and condensation UDF
2 Attachment(s)
Find attached the UDF i used for my simulation on Ansys 15 and ansys 17 because, ansys 16 doesnot work with me. It has a bug regarding this UDF.
It takes some time and many trials for simulating the HP. My advice is to start with 2D simple case and then introduce complexity with time. You will need to simulate the boiling tutorial to get some experience about this kind of simulations. For simulating the condensation, you will need to generate fine wall layers for catching the condensation droplets. For simulating the Heat pipe you can use these useful tutorials: 1-https://www.researchgate.net/profile...g+Tutorial.pdf 2-https://youtu.be/hPeGvczYHMM 3- https://youtu.be/LQ2y0sIXgio 4 -article: CFD modeling of flow and heat transfer in a thermosyphon Asghar Alizadehdakhel , Masoud Rahimi , Ammar Abdulaziz Alsairafi 5 -article-2:Three-dimensional CFD simulation of geyser boiling in a two-phase closed thermosyphon - Hussam Jouhara a,c,*, Bandar Fadhl b,c, Luiz C. Wrobel If anyone have a question please, write it here so every one can see it and i will reply. Thanks and good luck :) |
Not able to design the wick less mesh in fluent
Please someone upload the mesh file for the heat pipe (2D). I am not able to separate the water and vapor regions and also condenser adibatic and evaporator region.
|
Quote:
i am doing a simulation of a solar still.it needs an evaporation-condensation phase change model. my question is in Ansys 18.2 it included evaporation condensation phase change model.is it necessary to use your udf with lee model? |
All times are GMT -4. The time now is 17:15. |