CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

Prandlt-Glaubert singularity

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   December 10, 2016, 06:03
Question Prandlt-Glaubert singularity
  #1
New Member
 
Martin
Join Date: Nov 2016
Posts: 6
Rep Power: 9
Martin007 is on a distinguished road
Hello everyone,

I would like to study a Prandlt-Glaubert singularity on a jet fighter.

I have a problem with my solution since I don't visualize any liquid water. Furthermore the pressure, the velocity and the density are constant in all my enclosure box.(the liquid generation rate is not constant but the fraction liquid is constant.)

Here are my settings :
density based
steady
multi phase => Wet steam (I have no choice since density based). How can I choose the humidity percentage of the air inside the enclosure ?

Turbulent => K-epsilon

Operating condition : P=100965 Pa

Pressure inlet :
Total gauge pressure= 100965 Pa
Supersonic= 6300 Pa
=> v=330m/s

Pressure Outlet :
Total gauge pressure= 100965 Pa

I think that my issue is due to the Wet Steam option because I did not set a humidity rate.

Can I use an invicid model instead of a turbulent model for this case?

Also I would have liked to see simulate this singularity with a transient simulation and a pressure fonction depending on time in order to simulate an acceleration of the plane from Mach=0.7 to Mach=1.2 for example. Should I use a user define fonction ?

Thank you very much in advance for your answer.
Sincerely.
Martin007 is offline   Reply With Quote

Reply

Tags
aircraft, airflow, compressible, density based, wet steam condensation

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
IcoFoam parallel woes msrinath80 OpenFOAM Running, Solving & CFD 9 July 22, 2007 03:58
solution singularity litonx OpenFOAM Running, Solving & CFD 1 February 21, 2007 02:32
Could anybody help me see this error and give help liugx212 OpenFOAM Running, Solving & CFD 3 January 4, 2006 19:07
Singularity of grid?Volume meshing vs face meshing Ken Main CFD Forum 0 September 4, 2003 12:09
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 12:08


All times are GMT -4. The time now is 21:22.