Defining volume fraction for three-phase VOF

darang · February 1, 2016, 16:24

Dear Colleagues,

I successfully ran the oscillation of a single phase droplet in air. Now I am trying to simulate the oscillation of a core-shell structured liquid droplet in air. The problem involves three phases: liquid 1 in the core, liquid 2 for shell, and finally air. I applied the same modeling strategy that I used for the two-phase problem, but it failed.

I guess there must be something not right dealing with volume fraction of three phases. For two phase system, I did not have to worry about volume fraction, as it varies from 0 to 1 and I patched liquid with volume fraction 1.

What must be added or modified (maybe UDF to define volume fraction function for the three phases), if I want to extend a two-phase model to a three-phase model in Fluent?

Could anyone kindly share your idea or experience (or an example) with me?

Thank you!

wangchengan2003 · February 21, 2018, 01:53

Dear friend,
I meet similiar problem of three phases like you. Have you found the solution?
Best regards,
Chengan

February 1, 2016, 16:24	Defining volume fraction for three-phase VOF	#1
darang New Member Jon Lee Join Date: Jun 2012 Posts: 6 Rep Power: 13	Dear Colleagues, I successfully ran the oscillation of a single phase droplet in air. Now I am trying to simulate the oscillation of a core-shell structured liquid droplet in air. The problem involves three phases: liquid 1 in the core, liquid 2 for shell, and finally air. I applied the same modeling strategy that I used for the two-phase problem, but it failed. I guess there must be something not right dealing with volume fraction of three phases. For two phase system, I did not have to worry about volume fraction, as it varies from 0 to 1 and I patched liquid with volume fraction 1. What must be added or modified (maybe UDF to define volume fraction function for the three phases), if I want to extend a two-phase model to a three-phase model in Fluent? Could anyone kindly share your idea or experience (or an example) with me? Thank you! Last edited by darang; February 1, 2016 at 17:27.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Wrong flow in ratating domain problem	Sanyo	CFX	17	August 15, 2015 06:20
volume fraction in mixture model and VOF????	multiphase-flow	FLUENT	4	August 7, 2014 10:35
interDyMFoam - change in volume fraction	gopala	OpenFOAM Running, Solving & CFD	0	April 27, 2009 10:46
Differences between serial and parallel runs	carsten	OpenFOAM Bugs	11	September 12, 2008 11:16
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00

February 21, 2018, 01:53		#2
wangchengan2003 Member chengan.wang Join Date: Jan 2016 Location: china Posts: 47 Rep Power: 10	Dear friend, I meet similiar problem of three phases like you. Have you found the solution? Best regards, Chengan