CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

Assign certain layers as a liquid phase only in FLUENT

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 6, 2019, 07:10
Default Assign certain layers as a liquid phase only in FLUENT
  #1
New Member
 
Ahmed Elsayed
Join Date: Sep 2017
Posts: 23
Rep Power: 5
bolbol is on a distinguished road


I'm conducting a two-phase flow case in a pipe using FLUENT and given the velocity inlet B.C and vapor quality.
My question is how to assign the first layers close to the wall as liquid phase only? because my case treated as annular flow and these layers are an indication to the film thickness.
bolbol is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Discrete phase modelling - fluent BHUVANESH Fluent Multiphase 0 May 24, 2018 09:01
two phase flow, compressibility of liquid phase Ardalan Main CFD Forum 0 February 7, 2014 03:56
The fluent stopped and errors with "Emergency: received SIGHUP signal" yuyuxuan FLUENT 0 December 3, 2013 22:56
Fluent diverges when using inflation layers ziggo FLUENT 4 August 9, 2013 12:11
How can i model two phase for two seperate fluids in fluent? Khaled yousef FLUENT 0 April 24, 2013 14:58


All times are GMT -4. The time now is 04:55.