Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

How to determine the order of different second phases in a multiphase flow

Updated Threads

Reply

Search this Thread

May 7, 2019, 05:06	How to determine the order of different second phases in a multiphase flow	#1
wuming New Member wuming Join Date: Nov 2018 Posts: 26 Rep Power: 7	hey all！ I am simulating a gas-liquid-solid three-phase system, they all are Euler phase. The gas phase as the primary phase, the liquid and solid phase as the secondary phase. I found that the liquid and solid phase setting sequence has a great influence on the calculation results. So the second phase is not parallel? If not paraller,hao should i choose the order in a certain way? I would appreciate it if anyone could help me. Thanks a lot!

Reply

Tags

multiphase flow

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Issues on the simulation of high-speed compressible flow within turbomachinery	dowlee	OpenFOAM Running, Solving & CFD	11	August 6, 2021 06:40
Non-Newtonian liquid/air multiphase flow models	Wonder	Fluent Multiphase	0	April 7, 2015 06:59
Fluent v15 multiphase flow b.c. failure Non-channel flow	mickjazz	Fluent Multiphase	1	September 22, 2014 06:41
Ansys 11.0 CFX - solving electric potentials and multiphase flow	cfd_multiphyiscs	CFX	2	March 10, 2010 13:43
Multiphase Flow Problem	Robi	FLUENT	8	July 23, 2005 05:02

All times are GMT -4. The time now is 23:35.