CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > FLUENT > Fluent Multiphase

issue in creating isosurface on domain?

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   July 23, 2020, 02:54
Default issue in creating isosurface on domain?
  #1
New Member
 
Join Date: May 2020
Posts: 9
Rep Power: 2
Meesm1 is on a distinguished road
Respected fellows,
I am working on a project of resistance calculation of hull. My computational domain was divided into two parts inner and outer. I later created interfaces in fluent. Results were satisfactory but for post processing when I create iso-surface it is not connected to the outer part but a crack seems to be there. Pls guide me to resolve the issue. I need to visualize the wave pattern. Picture of the problem is attached.

Best Regards
Attached Images
File Type: jpg isosurface issue.jpg (44.0 KB, 0 views)
Meesm1 is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Can I achieve better convergence? sheaker CFX 12 September 19, 2019 16:36
Turbulence Viscosity Ratio issue in EXtended domain with Pressure Far Field BCs Muneeb FLUENT 0 December 6, 2018 16:48
Problem with creating a domain in hexpress glasgow_andrew NUMECA 2 March 11, 2014 13:04
Possible Bug in pimpleFoam (or createPatch) (or fluent3DMeshToFoam) cfdonline2mohsen OpenFOAM 3 October 21, 2013 10:28
How to access user defined materials when creating solid domain? 0906536m CFX 3 September 26, 2013 19:41


All times are GMT -4. The time now is 16:25.